• Altitude: ≤1000M

• Environmental temperature: -20℃-40℃. Max. temperature difference: 25℃

• Environmental humidity: relative humidity≤75% (After the insulation surface is dried, the generator can be used normally)

• Anti-earthquake ability: ≤class 8.

• Place: Indoor

• Main power supply: 380V three-phase four-wire, two-phase ≥20kVA

• Control voltage: 220V, single-phase ≥5kVA.

• The waveform of the power supply voltage is a sine wave, the waveform distortion rate is less than 3%, the frequency is 50Hz, and the power supply side should not suffer from overvoltage from the outside.

• There should be a reliable grounding point, the grounding power grid should have good impact characteristics, the grounding resistance should not be greater than 0.5Ω in the steady state.•

• Nominal voltage: ±900kV

•Rated energy: 90kJ

•Impulse capacitance: 0.1µF

•Nominal stage voltage: ±150kV

•Number of Stage: 6

• Rated stage energy: 15kJ

• Rated stage capacitance: 1.33µF

• Synchronization error rate: ≤1%

• Min. output voltage: ≥15%Un

• Waveform resistors are supplied, it can be adjusted based on load.

• Impulse voltage waveform and efficiency

• Standard lighting wave: wave head time: 1.2±30µs, wave tail time: 50±20%µs

When the positive and negative polarity lightning shock wave is no-load, the voltage utilization coefficient is ≥90%.•

• Standard lightning chopping wave: wave head time: 1.2±30%µs, truncation time: 3-6µs.

l With Glaninger circuit, Auxiliary regulation in the low-voltage circuit is equivalent to high-voltage wave modulation resistor to optimize the waveform.

• Rated voltage: 100kV.
• Capacitance: 2000pF.
• Resistor value: 0.1/0.2/0.5Ω current resistors, interchangeable